Easily monitor, report, and alert on temperatures. The new SiteSage WiTemp+ communicates wirelessly with the SiteSage gateway. This sensor is great for monitoring temperatures in rooms, walk-in coolers, walk-in freezers, heating and cooling equipment, and ventilation systems.
The WiTemp+ sensor includes an onboard temperatures sensor that can be used to measure temperatures ranging from -55°C to +125°C (-67°F to +257°F). To install the Wi-Temp+ using the onboard sensor, simply open the top of the sensor and insert the batteries (included). The WiTemp+ can be mounted using a variety of techniques including zip ties through the side slots, screws using the screw holes, Velcro tape or magnetic tape. In all cases it is best to orient the WiTemp+ vertically (and also mount the Gateway vertically).
The WiTemp+ also supports the installation of a single 1-Wire temperatures sensor. This is accomplished by wiring the data wire to the port on the left and the common wire to middle port on the WiTemp+. The WiTemp+ also supports the installation of a single contact closure sensor or pulse output device. This is accomplished by wiring the data wire to the port on the right and the common wire to middle port on the WiTemp+.
The sensor dimensions are 3.4" L x 2.4" W x 1" H.
To order this sensor and associated SiteSage hardware and software, call PowerWise at +1-207-370-6517, complete our contact form, or email firstname.lastname@example.org.
PowerWise is a proven innovator of monitoring and control technology.